Otter fencing from Tornado Wire
Otter fencing is used to restrict otters from entering specific areas – usually lakes containing valuable fish upon which otters would naturally seek to prey.
We understand that protecting fish from predatory otters is vital to the commercial success of angling lakes; Tornado Wire’s High Tensile otter fencing protects the valuable investment of expensive stock.
Otter populations are currently at a 40-year high in the UK and they are continuing to rise across Europe. As welcome as this resurgence may be to our natural heritage, otters are a fearsome predator. An unwelcome consequence of their increasing numbers is their impact on fisheries. Otters often prey on larger fish specimens, eating as little as 10% of the flesh and causing hundreds of thousands of pounds of decimation to fish stocks in the process.
All managed still water fisheries and fish farms provide otters and other predators with an easy and abundant food supply.
Points to consider
Tornado Torus otter fencing
To prevent otters from digging underneath fencing, at least 500mm should be buried in to the ground or turned out at ground level. Zinc and zinc aluminium coated agricultural fence service life can be affected significantly when exposed to extremely acidic or saline environments and this factor should be considered when designing your fence installation. For typical service life to be achieved it is recommended that the product must be installed in an atmosphere with corrosively class C1, C2 or C3 (very low/low/medium) in accordance with ISO 9223 and must not come into contact with substances that will accelerate corrosion, including but not limited to fertilisers, pesticides, herbicides, salt water and soils of pH lower than 5.5. Particularly at sites with peaty and wet ground conditions it is recommended that you have the soil pH tested prior to designing your installation.
As otters are also adept at climbing, the top 500mm should also be cranked towards the outside. Otters can squeeze through surprisingly small gaps. With a mesh of 100mm x 50mm, Tornado otter fence is a proven barrier.
Tornado works in partnership with Otterstop to offer a turnkey project management solution for owners of fisheries. From advising on Environment Agency funding and guidelines right the way through to providing practical help in erecting your fencing or finding a contractor to do it for you.
For an initial consultation contact Dave Marvell at Otterstop on 07973 254 626
Torus otter fencing
Knot
Features
- High-pressure bonded knot with continuous vertical stay wire
Benefits
- Smooth knot with no sharp edges
- Stronger than a hinge joint knot
Standard products
Description | Roll length mtrs | Weight kg | Wire dia mm | Suitable for |
---|---|---|---|---|
RL23/240/5 Light C5 | 50 | 99.8 | 2 | A one piece otter net, providing an ideal solution for fisheries. Buried 50cm under the ground, 140cm in height and a 50cm crank this one piece net is quick and efficient to install. |
RL19/180/5 Light C14 | 50 | 81.8 | 2 | Top section of the two piece otter net. Used in areas with restricted access. |
RL6/50/5 Light C5 | 100 | 48.9 | 2 | Bottom section of the two piece otter net. Used in areas with restricted access. |
Longer rolls of up to 500m are available in some specifications for use with unrolling and straining machinery.